Weekly Pool Maintenance
Here are the essential tasks for weekly pool care:
- Skim the surface of the water. Use a skimmer net to remove any leaves, bugs, or other debris that has floated to the top of the water.
- Brush the walls and floor of the pool. Use a pool brush to remove any algae or other buildup on the walls and floor of the pool.
- Vacuum the pool. Use a pool vacuum to remove any dirt or debris that has settled to the bottom of the pool.
- Check the water chemistry. Use a pool test kit to check the levels of chlorine, pH, and alkalinity. Adjust the levels as needed.
- Backwash the filter. Backwashing the filter removes any dirt or debris that has accumulated in the filter.
- Clean the pool equipment. Clean the skimmer baskets, pump strainer, and filter housing.
- Clean the pool deck. Hose down the pool deck and remove any dirt or debris.
Here are some additional tips for weekly pool care:
- Do not overfill the pool. This can put stress on the pump and filter.
- Run the pump and filter for at least 12 hours a day. This will help to circulate the water and keep it clean.
- Add algaecide to the pool on a weekly basis. Especially if your pool is exposed to a lot of sunlight.
- Shock the pool once a month to kill any algae or bacteria that may be present.
- Be sure to follow the manufacturer’s instructions for all pool chemicals.
By following these simple steps, you can keep your pool clean and safe for swimming all season long.
How To Vacuum The Pool
- Prepare your pool vacuum. Attach the vacuum head to the telescoping pole and the vacuum hose to the vacuum head. Make sure that the vacuum hose is free of air bubbles.
- Connect the vacuum hose to the skimmer. This is usually done by attaching the vacuum plate to the end of the hose and placing it over the suction vent in the skimmer.
- Turn on the pump. This will create suction that will pull the debris through the vacuum head and into the pump.
- Start vacuuming. Move the vacuum head along the bottom of the pool in a slow and steady motion. Be sure to cover all areas of the pool.
- Check the pump strainer. If the pump strainer becomes clogged, it will lose suction. To clear the strainer, remove it from the pump and clean it with a brush.
- Turn off the pump. Once you are finished vacuuming, turn off the pump.
- Disconnect the vacuum hose. Disconnect the vacuum hose from the skimmer and the vacuum head.
- Clean the vacuum head. Rinse the vacuum head with water and dry it with a towel.
Here are some additional tips for vacuuming your pool:
- If your pool is heavily soiled, you may need to vacuum it more than once a week.
- If you have a lot of leaves or debris in your pool, you may need to use a leaf skimmer to remove them before vacuuming.
- If the vacuum head gets stuck, turn off the pump and reposition it.
- Be sure to backwash your filter after vacuuming to remove any dirt or debris that may have been sucked into the filter.
By following these steps, you can easily vacuum your pool and keep it clean and sparkling.
Checking Water Chemistry
- Test strips: These are small, single-use strips that change color to indicate the concentration of a specific chemical. To use test strips, dip a strip into the water sample and swish it around for a few seconds. Then, compare the color of the strip to a color chart to read the concentration of the chemical.
- Test kits: These kits come with a variety of test solutions that react with different chemicals in the water. To use a test kit, add the appropriate test solution to a sample of water and wait for a few minutes. Then, compare the color of the solution to a color chart to read the concentration of the chemical.
The most important chemicals to test for in pool water are chlorine, pH, and alkalinity.
- Chlorine: Chlorine is a disinfectant that kills bacteria and algae. The ideal chlorine level for a pool is between 1 and 3 parts per million (ppm).
- pH: pH is a measure of how acidic or basic the water is. The ideal pH level for a pool is between 7.2 and 7.8.
- Alkalinity: Alkalinity helps to buffer the pH level of the water. The ideal alkalinity level for a pool is between 80 and 120 parts per million (ppm).
If the levels of any of these chemicals are outside of the ideal range, you will need to adjust them. You can do this by adding chemicals to the pool, or by draining and refilling the pool.
It is important to check the water chemistry of your pool on a regular basis, at least once a week. This will help to ensure that the water is clean and safe for swimming.
Here are some additional tips for checking water chemistry:
- Always follow the manufacturer’s instructions for the test kit or test strips you are using.
- Take the water sample from a location in the pool that is away from the skimmer and return jet.
- Stir the water sample before testing it.
- Read the test results carefully and make sure you understand what they mean.
- If you are unsure how to adjust the water chemistry, consult a pool professional.
By following these tips, you can easily check the water chemistry of your pool and keep it clean and safe for swimming.
Checking The Pump Strainer
- Turn off the pump. This will prevent any water from flowing through the pump and into the strainer.
- Locate the pump strainer. The pump strainer is usually located near the bottom of the pump. It is a metal or plastic basket that is attached to the pump.
- Remove the pump strainer. To remove the pump strainer, you will need to unscrew it or unclip it from the pump.
- Inspect the pump strainer. Look for any debris that may be clogging the strainer. This could include leaves, twigs, insects, or other small objects.
- Clean the pump strainer. If the pump strainer is clogged, you will need to clean it. You can do this by rinsing it with water or by using a brush to remove the debris.
- Reinstall the pump strainer. Once the pump strainer is clean, you can reinstall it on the pump.
- Turn on the pump. Turn on the pump and check to make sure that the water is flowing freely through the pump strainer.
Here are some additional tips for checking the pump strainer:
- You should check the pump strainer on a weekly basis, or more often if your pool is heavily used.
- If the pump strainer is not cleaned regularly, it can become clogged and restrict the flow of water through the pump. This can damage the pump and reduce the efficiency of your pool filter.
- If you have a cartridge filter, you may also need to clean the cartridge filter on a regular basis.
By following these steps, you can easily check the pump strainer in your pool and keep it clean and working properly.
Common Pool Problems
If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.
Algae Or Green Pool Water
Algae Problem:
Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.
90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.
DIY Solution:
Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional green pool cleaning services.
Clogged Pool Filter
Clogged Filter Problem:
The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.
DIY Solution:
When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool filter cleaning services.
Broken Pool Filter
Broken Filter Problem:
The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.
DIY Solution:
There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool filter repair services.
Foaming On The Pool Surface
Foaming Problem:
Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.
DIY Solution:
Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool cleaning services.
Minerals In Pool Water
Mineral Problem:
Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.
DIY Solution:
Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool maintenance services.
Murky Water Or Green Pool Water
Murky Or Green Pool Water Problem:
When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.
DIY Solution:
You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional green pool cleaning services.
Stains On Pool Walls Or Pool Tile
Green Pool Wall Or Tile Stains Problem:
If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.
DIY Solution:
After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.
Brian’s Pool Care Offers Solutions To Your Pool Problems
Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.
Cleaning A Green Pool In Ahwatukee 2023
Are you looking for the how to clean a green pool in 24 hours? If you answered yes, then you are in the right place. This article has 9 steps for you to use to turn your water from green to clear, including how to use a sand filter.
First, you need to know that you cannot clear a green pool in less than 24 hours, so this article is going to tell you how to clear it in around 4 to 5 days. The best method to keep your water clear is to have weekly or bi-weekly maintenance and cleaning done by a pool service company regularly. This ensures that you will never have a green pool.
Fastest Way To Clean A Green Pool
The fastest way to clean a green pool is by using pool chemicals and your pool filter. This process usually takes around 4-5 days but you will start noticing a major improvement after 24 hours.
1. Remove the Large Debris
Check the pool bottom for any large debris and remove it using a leaf net. You may have thought about using a skimmer, but don’t. You will just stir up the water and make it look worse than it was. Remove the debris as carefully as possible without stirring the water up.
Important: If you are unable to see the bottom of the pool, do not vacuum it. You will risk clogging or damaging the filter, skimmer and underground plumbing pipes.
2. Adjust the Pool Chemical Levels
Adjust your pH and alkalinity levels in the pool by using Alkalinity Plus and pH and pH minus. The chemical levels need to be in a certain range or your water will never be clear.
3. Shock the pool water
Shocking the pool water is just over-chlorinating it. You are increasing the chlorine level by adding up to 5 times the normal amount. This kills the bacteria that causes algae which turns your pool green. Owners need to be familiar with the shocking process because it will be needed for pool maintenance. Not sure how you can do it properly?
Time of Day
The best time to shock the pool is after the sun has gone down. Shocking the pool in the sun will affect chemical levels and can cause problems that could cost you more money. Shock it right the first time around, next you have to pick the shock type.
Choose a Shock Type
You will be able to pick liquid or powdered shock. If you pick a powder shock, you will need to add more water to your pool. For instance, for every pound of shock you use, you need to add 5 gallons of water. Stir the shock and water mixture until there are no granules left. The granules will sink to the bottom and damage the pool if it isn’t dissolved right. Liquid chlorine is much easier to use. You just pour it into the pool. Ensure that you spread it around and don’t just pour in one spot. Continue this for a couple of days until you notice the water change from green to a cloudy white. Add liquid chlorine to your filtration system so that it can be cleaned too. You will notice that the water going back into the pool once the filter is back on, which helps to spread it around.
Important: Never swim in pools that have been shocked. Wait until the water is completely clear before you touch the water. The water reader needs to be less than 3ppm to swim.
Add Algaecide
Add an algaecide to your water to remove the rest of the green algae.
4. Let the Sand Filter Run
Sand filtering and backwashing are needed to remove the green water and contaminants that made it green. Don’t just run the filter without backwashing. Green water could clog your filter. Backwashing the sand filter is normal and it would be the same steps that a professional would do to clear a green pool. There isn’t a thing as too much backwashing. The more you filter than backwash, the faster that your pool will become clear.
For DE Filters, remember you need to add more DE to your skimmer as close as you can to filter backwashing. Run the filter for 24 hours and backwash the pool filter around 4 times during the same day to get faster results. DE filters will clear green pools 50% faster than a sand filter.
5. Pool still not clear after 5 days?
If you have followed all the instructions and your pool isn’t clear in 5 days, then you could have pump or filter issues. Call a pool repair company to avoid any more damage.
You have spent a lot of money at this point and have to let a professional handle it. Your pool technician will give you a pat on the back for trying and then clean it the way it needs to be. That is why they are professionals, they have the experience needed to clear green water and dirty pools.
6. After Care
Once the water is mostly clear, you will notice some debris on the bottom of the pool. If there is just a small amount of debris then you can use a skimmer to scoop it up or use a pool vacuum and let it do its thing. If there is more debris than you can skim or vacuum, call a pool technician to professional vacuum it. This will save your filter from wear and tear as well as clogged pipes.
7. How to Clean a Green Pool Video
If you find that you are having trouble following the cleaning guide, check out the YouTube video that has all the steps in order and what products you will need.
8. Cleaning Products and Pool Chemicals
Ensure that you are purchasing the cleaning products and pool chemicals you will need to clear the pool. All of them can be found at a local pool supply store.
- Water testing kit
- Pool vacuum
- Algaecide
- pH chemicals
- Shock chlorine
- Chlorine tablets
- Liquid or powder chlorine
9. Enjoy a non-green pool
Hopefully, you have cleared your pool or if not, called a professional that can help you. We hope that you enjoyed the “How To Clean A Green Pool In 24 Hours“. Stay tuned for more helpful maintenance, cleaning and pool tips from Brian’s Pool Care.
Green Pool Cleaning Services In Ahwatukee
If you are looking for green pool cleaning services in Ahwatukee Brian’s Pool Care can help!
How Much Do Pools Cost In AZ?
The average cost to install an inground pool in the state of Arizona is $20,656, with prices ranging from $10,863-$31,241. According to Homeadvisor, there are a few different factors that can impact the overall cost of a pool in AZ.
Average Pool Costs In Phoenix AZ
The average cost of pool service in Phoenix is $233 per one time cleaning. Average cost of pool service for one time cleaning in Phoenix ranged from $121 to $372. See below to find prices for regular cleanings and other maintenance projects.
- Weekly pool service in Phoenix costs $125. Average weekly pool service in Phoenix ranged from $100-$150
- Bi-weekly pool service in Phoenix costs $125. Average bi-weekly pool service in Phoenix ranged from $100-$150
- Monthly pool service in Phoenix costs $115. Average Monthly pool service in Phoenix ranged from $80-$150
- The average opening and closing swimming pool maintenance cost is $450. Average opening and closing swimming pool maintenance ranged from $300 to $60
- The average other services (filter replacement, repairs, utilities) maintenance cost is $400. Average other services (filter replacement, repairs, utilities) maintenance cost ranged from $140-$665
Average Pool Cleaning Service Prices
Most swimming pool professionals charge anywhere between $75 to $100 per hour. Many offer a full range of services including but not limited to regular cleanings to maintenance of equipment to closing and opening he pool at the end of and the beginning of the season. Exact pricing can be determined by getting a free quote and the final cost will depend on the type of pool you own and its size.
Price To Clean An Above-Ground Pool vs. An In-Ground Pool
According to Homeadvisor $75-$100 per hour are the expected charges for cleaning, regardless of pool type. This is because both need the sides and bottom of the pool swept either by an automated cleaner or manually.
Looking from an average standpoint, it can be generally said total cleaning rates are less for above ground units for both those without and with a deck, just because of their more compact size when you compare them to in-ground pools. Because the interior is easy to access, the job takes less time, hence the lesser charges.
How Much Does Salt Water Pool Service Cost In Phoenix?
Salt and the cost of chemicals range from $70-$100 per year. In addition, you need to budget for $200-$800 every 3 to 7 years for the replacement of the salt cell. While there is greater up front cost of build a salt water unit, usually there are lower costs of maintenance that help offset some of the initial outlay.
Salt causes corrosion and it my (or may not) shorten the life of heaters, seals and other equipment. A professional can do a thorough inspection and suggest preventative measures to minimize the damage to your equipment. A good example of this is placing a disc made from zinc (cost $15) in your skimmer to absorb the corrosion.
Indoor Pool Maintenance Costs
Far less maintenance is required for an indoor pool but they do use around $15 of chemicals every month. Indoor structures are not exposed to dirt and debris like outdoor pools are, all the more so if you purchase a pool cover that can range in price from just $30 for a simple woven cover to more than $10,000 for an automatic version. Covers also have the advantage of helping to keep the water warm and they also reduce humidity.
Advantages of Using A Professional Pool Service
Professional and experienced Technicians must be familiar with engineering, plumbing, electrical components and chemistry to service your pool properly. However, many national companies who have high rates of turnover because of low pay frequently rely on inexperienced new employees. However, a local expert will likely offer a level of experience, ability and local knowledge that are worth a great deal. You should also search for and read positive online reviews for companies near to where you are located.
Annual Cost To Upkeep A Pool
The average cost of basic yearly upkeep on a pool is $1,500. On the high end you can expect to pay around $1,800 per year down to around $1,200 on the low end yearly upkeep costs. When you add in repairs and utilities, homeowners can expect to spend an average of $4,000 a year with costs ranging from $3,00-$5,000 per year for the pool to be kept in a good working condition.
How Much Does Weekly Pool Service Cost In Phoenix?
If you want a professional to perform weekly or bi-weekly maintenance on your pool you are gonig to be looking at costs ranging from $100 and $150 per month with an average of $125. Usually sold as service packages, they typically include the following:
- Emptying Skimmers.
- Applying Chemicals,
- Checking Water Levels
- Water Chemistry Testing
These services are vitally important to keep the pool safe and clean for use and packages like these are often the best option for homeowners who want to enjoy their pool but do not have time to complete the tasks themselves.
How Much Does Monthly Pool Service Cost In Phoenix?
Professional maintenance by an experienced technician runs on average $115 per month and ranges from a low of $80 to a high of $150 per month, depending on the services you require. Below gives you an idea for of costing for different maintenance packages and the services they include.
$80 per month
- Test water pH.
- Check equipment, filters and settings.
$90 per month
- Test water pH.
- Check equipment, filters and settings.
- Brushing
- Empty baskets and traps
- Robotic cleaners check
$150 per month
- Test water pH.
- Check equipment, filters and settings.
- Brushing
- Empty baskets and traps
- Robotic cleaners check
- Vacuum
- Skim
Free Pool Cleaning Estimates in Ahwatukee, Arizona
Receive a free pool care estimate in Ahwatukee, Arizona, by giving BPC Pool Maintenance a call today at 480-907-7959. Learn more about our pool service in Ahwatukee.
How Much Does Pool Service Cost In Phoenix 2023?
The average cost of pool service in Phoenix is $233 per one time cleaning. Average cost of pool service for one time cleaning in Phoenix ranged from $121 to $372 in 2023. See below to find prices for regular cleanings and other maintenance projects.
- Weekly pool service in Phoenix costs $125. Average weekly pool service in Phoenix ranged from $100-$150 in 2023.
- Bi-weekly pool service in Phoenix costs $125. Average bi-weekly pool service in Phoenix ranged from $100-$150 in 2023.
- Monthly pool service in Phoenix costs $115. Average Monthly pool service in Phoenix ranged from $80-$150 in 2023.
- The average opening and closing swimming pool maintenance cost is $450. Average opening and closing swimming pool maintenance ranged from $300 to $60 in 2023.
- The average other services (filter replacement, repairs, utilities) maintenance cost is $400. Average other services (filter replacement, repairs, utilities) maintenance cost ranged from $140-$665 in 2023.
Average Pool Cleaning Service Prices
Most swimming pool professionals charge anywhere between $75 to $100 per hour. Many offer a full range of services including but not limited to regular cleanings to maintenance of equipment to closing and opening he pool at the end of and the beginning of the season. Exact pricing can be determined by getting a free quote and the final cost will depend on the type of pool you own and its size.
Price To Clean An Above-Ground Pool vs. An In-Ground Pool
According to Homeadvisor $75-$100 per hour are the expected charges for cleaning, regardless of pool type. This is because both need the sides and bottom of the pool swept either by an automated cleaner or manually.
Looking from an average standpoint, it can be generally said total cleaning rates are less for above ground units for both those without and with a deck, just because of their more compact size when you compare them to in-ground pools. Because the interior is easy to access, the job takes less time, hence the lesser charges.
How Much Does Salt Water Pool Service Cost In Phoenix?
Salt and the cost of chemicals range from $70-$100 per year. In addition, you need to budget for $200-$800 every 3 to 7 years for the replacement of the salt cell. While there is greater up front cost of build a salt water unit, usually there are lower costs of maintenance that help offset some of the initial outlay.
Salt causes corrosion and it my (or may not) shorten the life of heaters, seals and other equipment. A professional can do a thorough inspection and suggest preventative measures to minimize the damage to your equipment. A good example of this is placing a disc made from zinc (cost $15) in your skimmer to absorb the corrosion.
Indoor Pool Maintenance Costs
Far less maintenance is required for an indoor pool but they do use around $15 of chemicals every month. Indoor structures are not exposed to dirt and debris like outdoor pools are, all the more so if you purchase a pool cover that can range in price from just $30 for a simple woven cover to more than $10,000 for an automatic version. Covers also have the advantage of helping to keep the water warm and they also reduce humidity.
Advantages of Using A Professional Pool Service
Professional and experienced Technicians must be familiar with engineering, plumbing, electrical components and chemistry to service your pool properly. However, many national companies who have high rates of turnover because of low pay frequently rely on inexperienced new employees. However, a local expert will likely offer a level of experience, ability and local knowledge that are worth a great deal. You should also search for and read positive online reviews for companies near to where you are located.
Annual Cost To Upkeep A Pool
The average cost of basic yearly upkeep on a pool is $1,500. On the high end you can expect to pay around $1,800 per year down to around $1,200 on the low end yearly upkeep costs. When you add in repairs and utilities, homeowners can expect to spend an average of $4,000 a year with costs ranging from $3,00-$5,000 per year for the pool to be kept in a good working condition.
How Much Does Weekly Pool Service Cost In Phoenix?
If you want a professional to perform weekly or bi-weekly maintenance on your pool you are gonig to be looking at costs ranging from $100 and $150 per month with an average of $125. Usually sold as service packages, they typically include the following:
- Emptying Skimmers.
- Applying Chemicals,
- Checking Water Levels
- Water Chemistry Testing
These services are vitally important to keep the pool safe and clean for use and packages like these are often the best option for homeowners who want to enjoy their pool but do not have time to complete the tasks themselves.
How Much Does Monthly Pool Service Cost In Phoenix?
Professional maintenance by an experienced technician runs on average $115 per month and ranges from a low of $80 to a high of $150 per month, depending on the services you require. Below gives you an idea for of costing for different maintenance packages and the services they include.
$80 per month
- Test water pH.
- Check equipment, filters and settings.
$90 per month
- Test water pH.
- Check equipment, filters and settings.
- Brushing
- Empty baskets and traps
- Robotic cleaners check
$150 per month
- Test water pH.
- Check equipment, filters and settings.
- Brushing
- Empty baskets and traps
- Robotic cleaners check
- Vacuum
- Skim
Free Pool Cleaning Estimates in Ahwatukee, Arizona
Receive a free pool care estimate in Ahwatukee, Arizona, by giving BPC Pool Maintenance a call today at 480-907-7959. Learn more about our pool service in Ahwatukee.
Acid Wash Pool Costs in Ahwatukee 2023?
On average, acid washing a pool costs about $217, average prices ranged from $178 to $255 for pool acid washing in the US in 2023 according to improvenet.com.
What is the Cost to Acid Wash a Pool?
Your gorgeous pool is the main feature of your outdoor living area and the highlight for your social gatherings, so the growth of algae, calcium residue and stains are a major issue. Dealing with those difficult stains typically needs an acid wash, a process an experienced pool cleaner should be hired because of the dangerous chemicals that need to be used. Prior to you starting to look to hire a pool professional for the project, take a couple of minutes and learn more about what the costs involve.
Acid Wash Pool Cost
The cost to acid wash a pool is subject to your location, access to the pool’s, the time of year and how big the pool is. For a pool that measures around 500 square feet, the costs typically range from the low cost of $178 to a high cost of $255. This price comprises of the cost of labor and all the required chemicals.
If you plan to acid wash your own pool, your only costs will be for the various chemicals, in which cost about $30. You might also need to purchase a sump pump and rent or buy protective clothes.
When to Acid Wash a Pool
Having a pool built is a fantastic way to get more pleasure out of your backyard, nevertheless pools need routine maintenance to help keep the water clean and to hinder the growth of algae and/or stains. When you leave your pool unused for any period of time, the growth of algae begins to stain the surface of the pool and makes the water slippery. When your water is static and you can’t see the bottom of your pool, it’s time for the draining of the pool for an acid wash. You might also want to acid wash your pool when calcium residue has caused discoloring of the pool surface.
Benefits of Using A Professional Pool Service
Experienced and professional pool techs are required to be knowledgeable with engineering, plumbing, electrical parts and pool chemicals for servicing your pool correctly. Nevertheless, a lot of national pool companies that have high turnover rates because of low pay, often times hire inexperienced new pool techs. Despite that, a local pool professional will most likely provide a level of experience, capability and local knowledge that are invaluable. It’s a good idea to also search for and read positive online reviews for pool companies near Ahwatukee.
Acid Washing Vs. Pool Cleaning
Typical pool cleaning does not involve draining the pool. General pool cleaning processes comprise of:
- Scrubbing the pool with a stiff pool brush
- The removal of leaves and floating debris with a pool net
- Cleaning and/or the replacement of the cartridges inside the pool filter
- Checking the pools chemical levels and adjusting as required
Acid washing a pool is a more significant undertaking. It involves completely draining the pool and then utilizing an acid solution for the removal of a very fine film of the pool’s surface, hence the removal any calcium residue and stains.
Understanding Different Swimming Pool Chemicals
There are four main types of swimming pool chemicals: chlorine, bromine, pH adjusters, and algaecides.
- Chlorine is the most common pool chemical. It kills bacteria and algae by releasing a chemical reaction that forms a gas called hypochlorous acid. Chlorine can be added to the pool in liquid, granular, or tablet form.
- Bromine is a less common pool chemical than chlorine. It is also effective at killing bacteria and algae, but it is more expensive and can be more difficult to use. Bromine is available in liquid or tablet form.
- pH adjusters are used to maintain the pH balance of the pool water. The pH level should be between 7.2 and 7.8. If the pH level is too low, the water will be acidic and corrosive. If the pH level is too high, the water will be alkaline and cloudy.
- Algaecides are used to prevent the growth of algae in the pool. Algae can make the water look green and cloudy, and it can also be harmful to swimmers. Algaecides are available in liquid, granular, or tablet form.
In addition to these four main types of chemicals, there are also a number of other chemicals that can be used to maintain a swimming pool. These include:
- Scale and stain removers are used to remove mineral deposits from the pool walls and floors.
- Clarifiers are used to remove small particles from the water, making it look clearer.
- Sanitizers are used to kill bacteria and viruses in the pool water.
- Winterizers are used to protect the pool from freezing during the winter.
The amount and frequency of using pool chemicals will vary depending on the size of the pool, the climate, and the amount of use. It is important to test the pool water regularly and add chemicals as needed.
Pool Service in Ahwatukee, Arizona
BPC offers pool service in Ahwatukee, Arizona. We also offer pool maintenance and service, pool leak repair, weekly pool cleaning services, and green pool cleaning services. Give BPC a call at 480-907-7959 or text us at 602-570-8124. You can also get a free quote by filling out our contact form.
Pool Trouble Issues 2023
Are you having pool problems in If so, Brian’s Pool Care can help! We put together a list of the most common pool problems and solutions to fix your problem yourself or hire a professional pool repair company to do it for you.
As summer has come, you are probably prepared to jump in the pool, right? Well, with that comes pool maintenance and many find it to be a daunting chore.
Since most people are not professional chemists, it is recommended by pool experts that you ask them about any issues you’re having before taking action. You can easily take in water samples to your local pool store on a monthly basis to have it tested.
There are many reasons why you should use a professional swimming pool cleaner. Here are some of the most important ones:
- They have the experience and expertise to clean your pool properly. Professional pool cleaners have been trained to clean pools of all shapes and sizes. They know how to use the right equipment and chemicals to get the job done right.
- They can save you time and hassle. Cleaning a pool can be a lot of work, especially if you have a large pool. Professional pool cleaners can come to your home and clean your pool on a regular basis, so you don’t have to worry about it.
- They can help you keep your pool safe and healthy. Professional pool cleaners know how to balance the chemicals in your pool and remove any algae or bacteria. This helps to keep your pool safe for swimming.
- They can help extend the life of your pool. Regular pool maintenance can help to prevent damage to your pool’s surface and equipment. This can save you money in the long run.
If you have a swimming pool, it is a good idea to use a professional pool cleaner. They can help you keep your pool clean, safe, and healthy.
Here are some of the services that professional pool cleaners typically offer:
- Pool cleaning: This includes skimming the surface of the pool, vacuuming the bottom, and brushing the walls and tiles.
- Pool water balancing: This involves adjusting the pH and chlorine levels in the water to keep it safe and healthy.
- Pool algae removal: This is done by using chemicals or physical methods to remove algae from the pool.
- Pool pump and filter maintenance: This includes cleaning and servicing the pump and filter to keep them working properly.
- Pool opening and closing: This is done in the spring and fall to prepare the pool for swimming season.
The cost of professional pool cleaning services will vary depending on the size of your pool, the frequency of service, and the location of your home. You can get quotes from several different companies before making a decision.
I hope this helps!
Common Pool Problems In Ahwatukee
If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.
Algae Or Green Pool Water
Algae Problem:
Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.
90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.
DIY Solution:
Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional green pool cleaning services.
Clogged Pool Filter
Clogged Filter Problem:
The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.
DIY Solution:
When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool filter cleaning services.
Broken Pool Filter
Broken Filter Problem:
The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.
DIY Solution:
There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool filter repair services.
Foaming On The Pool Surface
Foaming Problem:
Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.
DIY Solution:
Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool cleaning services.
Minerals In Pool Water
Mineral Problem:
Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.
DIY Solution:
Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool maintenance services.
Murky Water Or Green Pool Water
Murky Or Green Pool Water Problem:
When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.
DIY Solution:
You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional green pool cleaning services.
Stains On Pool Walls Or Pool Tile
Green Pool Wall Or Tile Stains Problem:
If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.
DIY Solution:
After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”
PROFESSIONAL Solution:
Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.
Brian’s Pool Care Offers Solutions To Your Pool Problems
Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.
Acid Wash Pool Costs 2023
On average, acid washing a pool costs about $217, average prices ranged from $178 to $255 for pool acid washing in the US in 2023 according to improvenet.com.
What is the Cost to Acid Wash a Pool?
Your gorgeous pool is the main feature of your outdoor living area and the highlight for your social gatherings, so the growth of algae, calcium residue and stains are a major issue. Dealing with those difficult stains typically needs an acid wash, a process an experienced pool cleaner should be hired because of the dangerous chemicals that need to be used. Prior to you starting to look to hire a pool professional for the project, take a couple of minutes and learn more about what the costs involve.
Acid Wash Pool Cost
The cost to acid wash a pool is subject to your location, access to the pool’s, the time of year and how big the pool is. For a pool that measures around 500 square feet, the costs typically range from the low cost of $178 to a high cost of $255. This price comprises of the cost of labor and all the required chemicals.
If you plan to acid wash your own pool, your only costs will be for the various chemicals, in which cost about $30. You might also need to purchase a sump pump and rent or buy protective clothes.
When to Acid Wash a Pool
Having a pool built is a fantastic way to get more pleasure out of your backyard, nevertheless pools need routine maintenance to help keep the water clean and to hinder the growth of algae and/or stains. When you leave your pool unused for any period of time, the growth of algae begins to stain the surface of the pool and makes the water slippery. When your water is static and you can’t see the bottom of your pool, it’s time for the draining of the pool for an acid wash. You might also want to acid wash your pool when calcium residue has caused discoloring of the pool surface.
Understanding Different Swimming Pool Chemicals
There are four main types of swimming pool chemicals: chlorine, bromine, pH adjusters, and algaecides.
- Chlorine is the most common pool chemical. It kills bacteria and algae by releasing a chemical reaction that forms a gas called hypochlorous acid. Chlorine can be added to the pool in liquid, granular, or tablet form.
- Bromine is a less common pool chemical than chlorine. It is also effective at killing bacteria and algae, but it is more expensive and can be more difficult to use. Bromine is available in liquid or tablet form.
- pH adjusters are used to maintain the pH balance of the pool water. The pH level should be between 7.2 and 7.8. If the pH level is too low, the water will be acidic and corrosive. If the pH level is too high, the water will be alkaline and cloudy.
- Algaecides are used to prevent the growth of algae in the pool. Algae can make the water look green and cloudy, and it can also be harmful to swimmers. Algaecides are available in liquid, granular, or tablet form.
In addition to these four main types of chemicals, there are also a number of other chemicals that can be used to maintain a swimming pool. These include:
- Scale and stain removers are used to remove mineral deposits from the pool walls and floors.
- Clarifiers are used to remove small particles from the water, making it look clearer.
- Sanitizers are used to kill bacteria and viruses in the pool water.
- Winterizers are used to protect the pool from freezing during the winter.
The amount and frequency of using pool chemicals will vary depending on the size of the pool, the climate, and the amount of use. It is important to test the pool water regularly and add chemicals as needed.
Benefits of Using A Professional Pool Service
Experienced and professional pool techs are required to be knowledgeable with engineering, plumbing, electrical parts and pool chemicals for servicing your pool correctly. Nevertheless, a lot of national pool companies that have high turnover rates because of low pay, often times hire inexperienced new pool techs. Despite that, a local pool professional will most likely provide a level of experience, capability and local knowledge that are invaluable. It’s a good idea to also search for and read positive online reviews for pool companies near Ahwatukee.
Acid Washing Vs. Pool Cleaning
Typical pool cleaning does not involve draining the pool. General pool cleaning processes comprise of:
- Scrubbing the pool with a stiff pool brush
- The removal of leaves and floating debris with a pool net
- Cleaning and/or the replacement of the cartridges inside the pool filter
- Checking the pools chemical levels and adjusting as required
Acid washing a pool is a more significant undertaking. It involves completely draining the pool and then utilizing an acid solution for the removal of a very fine film of the pool’s surface, hence the removal any calcium residue and stains.
Pool Service in Ahwatukee, Arizona
BPC offers pool service in Ahwatukee, Arizona. We also offer pool maintenance and service, pool leak repair, weekly pool cleaning services, and green pool cleaning services. Give BPC a call at 480-907-7959 or text us at 602-570-8124. You can also get a free quote by filling out our contact form.
How Much Does It Cost To Acid Wash A Pool in Ahwatukee 2022?
On average, acid washing a pool costs about $217, average prices ranged from $178 to $255 for pool acid washing in the US in 2022 according to improvenet.com.
What is the Cost to Acid Wash a Pool?
Your gorgeous pool is the main feature of your outdoor living area and the highlight for your social gatherings, so the growth of algae, calcium residue and stains are a major issue. Dealing with those difficult stains typically needs an acid wash, a process an experienced pool cleaner should be hired because of the dangerous chemicals that need to be used. Prior to you starting to look to hire a pool professional for the project, take a couple of minutes and learn more about what the costs involve.
Acid Wash Pool Cost
The cost to acid wash a pool is subject to your location, access to the pool’s, the time of year and how big the pool is. For a pool that measures around 500 square feet, the costs typically range from the low cost of $178 to a high cost of $255. This price comprises of the cost of labor and all the required chemicals.
If you plan to acid wash your own pool, your only costs will be for the various chemicals, in which cost about $30. You might also need to purchase a sump pump and rent or buy protective clothes.
When to Acid Wash a Pool
Having a pool built is a fantastic way to get more pleasure out of your backyard, nevertheless pools need routine maintenance to help keep the water clean and to hinder the growth of algae and/or stains. When you leave your pool unused for any period of time, the growth of algae begins to stain the surface of the pool and makes the water slippery. When your water is static and you can’t see the bottom of your pool, it’s time for the draining of the pool for an acid wash. You might also want to acid wash your pool when calcium residue has caused discoloring of the pool surface.
Benefits of Using A Professional Pool Service
Experienced and professional pool techs are required to be knowledgeable with engineering, plumbing, electrical parts and pool chemicals for servicing your pool correctly. Nevertheless, a lot of national pool companies that have high turnover rates because of low pay, often times hire inexperienced new pool techs. Despite that, a local pool professional will most likely provide a level of experience, capability and local knowledge that are invaluable. It’s a good idea to also search for and read positive online reviews for pool companies near Ahwatukee.
Acid Washing Vs. Pool Cleaning
Typical pool cleaning does not involve draining the pool. General pool cleaning processes comprise of:
- Scrubbing the pool with a stiff pool brush
- The removal of leaves and floating debris with a pool net
- Cleaning and/or the replacement of the cartridges inside the pool filter
- Checking the pools chemical levels and adjusting as required
Acid washing a pool is a more significant undertaking. It involves completely draining the pool and then utilizing an acid solution for the removal of a very fine film of the pool’s surface, hence the removal any calcium residue and stains.
Pool Service in Ahwatukee, Arizona
BPC offers pool service in Ahwatukee, Arizona. We also offer pool maintenance and service, pool leak repair, weekly pool cleaning services, and green pool cleaning services. Give BPC a call at 480-907-7959 or text us at 602-570-8124. You can also get a free quote by filling out our contact form.
Cleaning A Green Pool In Ahwatukee 2022
Are you looking for the how to clean a green pool in 24 hours? If you answered yes, then you are in the right place. This article has 9 steps for you to use to turn your water from green to clear, including how to use a sand filter.
First, you need to know that you cannot clear a green pool in less than 24 hours, so this article is going to tell you how to clear it in around 4 to 5 days. The best method to keep your water clear is to have weekly or bi-weekly maintenance and cleaning done by a pool service company regularly. This ensures that you will never have a green pool.
Fastest Way To Clean A Green Pool
The fastest way to clean a green pool is by using pool chemicals and your pool filter. This process usually takes around 4-5 days but you will start noticing a major improvement after 24 hours.
1. Remove the Large Debris
Check the pool bottom for any large debris and remove it using a leaf net. You may have thought about using a skimmer, but don’t. You will just stir up the water and make it look worse than it was. Remove the debris as carefully as possible without stirring the water up.
Important: If you are unable to see the bottom of the pool, do not vacuum it. You will risk clogging or damaging the filter, skimmer and underground plumbing pipes.
2. Adjust the Pool Chemical Levels
Adjust your pH and alkalinity levels in the pool by using Alkalinity Plus and pH and pH minus. The chemical levels need to be in a certain range or your water will never be clear.
3. Shock the pool water
Shocking the pool water is just over-chlorinating it. You are increasing the chlorine level by adding up to 5 times the normal amount. This kills the bacteria that causes algae which turns your pool green. Owners need to be familiar with the shocking process because it will be needed for pool maintenance. Not sure how you can do it properly?
Time of Day
The best time to shock the pool is after the sun has gone down. Shocking the pool in the sun will affect chemical levels and can cause problems that could cost you more money. Shock it right the first time around, next you have to pick the shock type.
Choose a Shock Type
You will be able to pick liquid or powdered shock. If you pick a powder shock, you will need to add more water to your pool. For instance, for every pound of shock you use, you need to add 5 gallons of water. Stir the shock and water mixture until there are no granules left. The granules will sink to the bottom and damage the pool if it isn’t dissolved right. Liquid chlorine is much easier to use. You just pour it into the pool. Ensure that you spread it around and don’t just pour in one spot. Continue this for a couple of days until you notice the water change from green to a cloudy white. Add liquid chlorine to your filtration system so that it can be cleaned too. You will notice that the water going back into the pool once the filter is back on, which helps to spread it around.
Important: Never swim in pools that have been shocked. Wait until the water is completely clear before you touch the water. The water reader needs to be less than 3ppm to swim.
Add Algaecide
Add an algaecide to your water to remove the rest of the green algae.
4. Let the Sand Filter Run
Sand filtering and backwashing are needed to remove the green water and contaminants that made it green. Don’t just run the filter without backwashing. Green water could clog your filter. Backwashing the sand filter is normal and it would be the same steps that a professional would do to clear a green pool. There isn’t a thing as too much backwashing. The more you filter than backwash, the faster that your pool will become clear.
For DE Filters, remember you need to add more DE to your skimmer as close as you can to filter backwashing. Run the filter for 24 hours and backwash the pool filter around 4 times during the same day to get faster results. DE filters will clear green pools 50% faster than a sand filter.
5. Pool still not clear after 5 days?
If you have followed all the instructions and your pool isn’t clear in 5 days, then you could have pump or filter issues. Call a pool repair company to avoid any more damage.
You have spent a lot of money at this point and have to let a professional handle it. Your pool technician will give you a pat on the back for trying and then clean it the way it needs to be. That is why they are professionals, they have the experience needed to clear green water and dirty pools.
6. After Care
Once the water is mostly clear, you will notice some debris on the bottom of the pool. If there is just a small amount of debris then you can use a skimmer to scoop it up or use a pool vacuum and let it do its thing. If there is more debris than you can skim or vacuum, call a pool technician to professional vacuum it. This will save your filter from wear and tear as well as clogged pipes.
7. How to Clean a Green Pool Video
If you find that you are having trouble following the cleaning guide, check out the YouTube video that has all the steps in order and what products you will need.
8. Cleaning Products and Pool Chemicals
Ensure that you are purchasing the cleaning products and pool chemicals you will need to clear the pool. All of them can be found at a local pool supply store.
- Water testing kit
- Pool vacuum
- Algaecide
- pH chemicals
- Shock chlorine
- Chlorine tablets
- Liquid or powder chlorine
9. Enjoy a non-green pool
Hopefully, you have cleared your pool or if not, called a professional that can help you. We hope that you enjoyed the “How To Clean A Green Pool In 24 Hours“. Stay tuned for more helpful maintenance, cleaning and pool tips from Brian’s Pool Care.
Green Pool Cleaning Services In Ahwatukee
If you are looking for green pool cleaning services in Ahwatukee Brian’s Pool Care can help!
Pool Service Costs In Ahwatukee 2022
The average pool service cost in Ahwatukee is $233 for each 1-time cleaning. Average price of pool service for 1-time cleanings in Ahwatukee ranged from around $121 – $372 in 2022. Keep reading to find costs for routine pool cleanings and other pool maintenance projects.
Average Pool Cleaning Service Costs in Ahwatukee
A lot swimming pool companies charge anywhere from $75 – $100 each hour. Many of them provide a full array of services comprising of routine cleanings to the maintenance of pool equipment to opening and closing the pool towards the end of and the start of the swimming season. Pricing can be established by getting a free estimate and your final cost is subject to the pool type and size.
What is the Cost of Salt-Water Pool Service In Ahwatukee?
Salt and the price of their chemicals are from $70 to $100 annually. Additionally, you’ll need to set aside $200-$800 every three to seven years for the salt cell replacement. Whereas there is increased up-front cost of building a salt-water unit, typically there are reduced costs for maintenance that helps offset some of the initial cost.
Salt creates corrosion and it might (or might not) shorten the life of pool heaters, it’s seals and other pool equipment. A professional can go through a thorough inspection and advise preventative measures to decrease the damage of your equipment. An example of their advisement is putting a disc composed of zinc ($15) inside the pool skimmer to soak up the corrosion.
.
Indoor Pool Maintenance Costs
A lot less maintenance is needed for indoor pools, but they do use upwards of $15 of chemicals each month. Indoor pools aren’t vulnerable to dirt and debris like their counter parts are, all the more so if you buy a pool cover that may range in cost from just $30 for a easy to use woven pool cover to upwards of $10,000 for an automatic cover. Pool covers also have the benefit of keeping the water at a comfortable temperature and they also decrease humidity.
Benefits of Using A Professional Pool Service
Experienced and professional pool techs are required to be knowledgeable with engineering, plumbing, electrical parts and pool chemicals for servicing your pool correctly. Nevertheless, a lot of national pool companies that have high turnover rates because of low pay, often times hire inexperienced new pool techs. Despite that, a local pool professional will most likely provide a level of experience, capability and local knowledge that are invaluable. It’s a good idea to also search for and read positive online reviews for pool companies near Ahwatukee.
What is the Cost of Weekly Pool Service In Ahwatukee?
If you want a pool professional to carry out weekly or bi-weekly pool maintenance, you are going to be facing costs ranging from $100 to $150 each month with an average cost of $125. Typically offers as service bundles, they usually comprise of the following:
• Emptying of Pool Skimmers
• Administering Pool Chemicals
• Checking Pool Water Levels
• Pool Water Chemical Testing
These pool services are critically important in keeping the pool safe and clean for you and your family and guests and packages such as these are usually the best option for homeowners that want to enjoy their pool but don’t have the time to maintain their pool themselves.
Pool Service in Ahwatukee, Arizona
BPC offers pool service in Ahwatukee, Arizona. We also offer pool maintenance and service, pool leak repair, weekly pool cleaning services, and green pool cleaning services. Give BPC a call at 480-907-7959 or text us at 602-570-8124. You can also get a free quote by filling out our contact form.