Why Is My Pool Light Not Working?
Let’s take a look at the most common reasons why your pool lights may not be working and what you can do to diagnose/fix the issues.
Reasons Why Your Pool Lights Are Not Working
Here are four reasons why pool lights are not working and a few DIY tips to help you fix your lighting.
Burnt Out Bulb
A broken or burnt-out light bulb is the most common reason why your lighting is not working. If this is the case with your pool lights, all you’ll have to do is switch out the light bulb.
Here is a quick guide to switching out the bulb(s):
- Shut off the breaker and all power switches to start.
- Remove the lens and bulb.
- Replace the bulb with a new one.
- Turn your light on to test it.
- Place the bulb underwater to make sure there are no air leaks.
- Replace the bulb and fixture if everything works properly.
If the issue is still not solved, it could be as simple as a new light bulb that is defective. Switch out the bulb and try another one.
Moisture Accumulation Within Optical Components
It is well established that the presence of water within an optical lens can result in complete luminous failure. Should you suspect this condition, carefully remove the lighting fixture from its mounting. Thoroughly dry the light fixture and reinstall it with a replacement bulb. Following reassembly of the lighting unit, ensure the gasket is securely fastened.
The formation of small air pockets indicates insufficient gasket tightening during reinstallation. Should the light remain inoperative, conduct a thorough examination of the lens for any evidence of leakage, structural damage, or deformation.
Deteriorated Fastening Aperture
In older pool lighting systems, the screw hole may deteriorate over extended periods and lose its capacity to secure the light fixture adequately. A light wedge may be inserted to provide necessary stabilization of the fixture.
Inadequate fixture retention permits water infiltration, which can compromise the light cord conduit. Should the conduit sustain damage, immediate sealing measures must be implemented.
Ground Fault Circuit Interrupter Outlet Malfunction
When the lens demonstrates proper functionality, attention should be directed toward the ground fault circuit interrupter (GFCI) outlet. A red indicator button on the GFCI outlet signifies that electrical power is not reaching the light fixture.
Examine the circuit breaker, fuse, and all associated switches connected to the malfunctioning light. Verify that each component is positioned in the “ON” setting.
LED Pool Light Installation By Brian’s Pool Care
Brian’s Pool Care in Ahwatukee, Arizona is your go-to for top-of-the-line pool LED products and installations. LED lights are very energy efficient and will not only look great while adding new life to your environment and property; they will save you money on your power bill. Replace your old energy wasting 75 watt pool light, or your old fiber optic pool light with our state-of-the-art new LED lighting technology! Receive a free pool care estimate by giving BPC Pool Maintenance a call today at 480-907-7959.
