pool filter not working ahwatukee

You Are Here: Home / Archives / Tag / pool filter not working ahwatukee

Weekly Pool Maintenance

Categories: Tags:

Weekly Pool Maintenance

Here are the essential tasks for weekly pool care:

  • Skim the surface of the water. Use a skimmer net to remove any leaves, bugs, or other debris that has floated to the top of the water.
  • Brush the walls and floor of the pool. Use a pool brush to remove any algae or other buildup on the walls and floor of the pool.
  • Vacuum the pool. Use a pool vacuum to remove any dirt or debris that has settled to the bottom of the pool.
  • Check the water chemistry. Use a pool test kit to check the levels of chlorine, pH, and alkalinity. Adjust the levels as needed.
  • Backwash the filter. Backwashing the filter removes any dirt or debris that has accumulated in the filter.
  • Clean the pool equipment. Clean the skimmer baskets, pump strainer, and filter housing.
  • Clean the pool deck. Hose down the pool deck and remove any dirt or debris.

Here are some additional tips for weekly pool care:

  • Do not overfill the pool. This can put stress on the pump and filter.
  • Run the pump and filter for at least 12 hours a day. This will help to circulate the water and keep it clean.
  • Add algaecide to the pool on a weekly basis. Especially if your pool is exposed to a lot of sunlight.
  • Shock the pool once a month to kill any algae or bacteria that may be present.
  • Be sure to follow the manufacturer’s instructions for all pool chemicals.

By following these simple steps, you can keep your pool clean and safe for swimming all season long.

How To Vacuum The Pool

  1. Prepare your pool vacuum. Attach the vacuum head to the telescoping pole and the vacuum hose to the vacuum head. Make sure that the vacuum hose is free of air bubbles.
  2. Connect the vacuum hose to the skimmer. This is usually done by attaching the vacuum plate to the end of the hose and placing it over the suction vent in the skimmer.
  3. Turn on the pump. This will create suction that will pull the debris through the vacuum head and into the pump.
  4. Start vacuuming. Move the vacuum head along the bottom of the pool in a slow and steady motion. Be sure to cover all areas of the pool.
  5. Check the pump strainer. If the pump strainer becomes clogged, it will lose suction. To clear the strainer, remove it from the pump and clean it with a brush.
  6. Turn off the pump. Once you are finished vacuuming, turn off the pump.
  7. Disconnect the vacuum hose. Disconnect the vacuum hose from the skimmer and the vacuum head.
  8. Clean the vacuum head. Rinse the vacuum head with water and dry it with a towel.

Here are some additional tips for vacuuming your pool:

  • If your pool is heavily soiled, you may need to vacuum it more than once a week.
  • If you have a lot of leaves or debris in your pool, you may need to use a leaf skimmer to remove them before vacuuming.
  • If the vacuum head gets stuck, turn off the pump and reposition it.
  • Be sure to backwash your filter after vacuuming to remove any dirt or debris that may have been sucked into the filter.

By following these steps, you can easily vacuum your pool and keep it clean and sparkling.

Checking Water Chemistry

  • Test strips: These are small, single-use strips that change color to indicate the concentration of a specific chemical. To use test strips, dip a strip into the water sample and swish it around for a few seconds. Then, compare the color of the strip to a color chart to read the concentration of the chemical.
  • Test kits: These kits come with a variety of test solutions that react with different chemicals in the water. To use a test kit, add the appropriate test solution to a sample of water and wait for a few minutes. Then, compare the color of the solution to a color chart to read the concentration of the chemical.

The most important chemicals to test for in pool water are chlorine, pH, and alkalinity.

  • Chlorine: Chlorine is a disinfectant that kills bacteria and algae. The ideal chlorine level for a pool is between 1 and 3 parts per million (ppm).
  • pH: pH is a measure of how acidic or basic the water is. The ideal pH level for a pool is between 7.2 and 7.8.
  • Alkalinity: Alkalinity helps to buffer the pH level of the water. The ideal alkalinity level for a pool is between 80 and 120 parts per million (ppm).

If the levels of any of these chemicals are outside of the ideal range, you will need to adjust them. You can do this by adding chemicals to the pool, or by draining and refilling the pool.

It is important to check the water chemistry of your pool on a regular basis, at least once a week. This will help to ensure that the water is clean and safe for swimming.

Here are some additional tips for checking water chemistry:

  • Always follow the manufacturer’s instructions for the test kit or test strips you are using.
  • Take the water sample from a location in the pool that is away from the skimmer and return jet.
  • Stir the water sample before testing it.
  • Read the test results carefully and make sure you understand what they mean.
  • If you are unsure how to adjust the water chemistry, consult a pool professional.

By following these tips, you can easily check the water chemistry of your pool and keep it clean and safe for swimming.

Checking The Pump Strainer

  1. Turn off the pump. This will prevent any water from flowing through the pump and into the strainer.
  2. Locate the pump strainer. The pump strainer is usually located near the bottom of the pump. It is a metal or plastic basket that is attached to the pump.
  3. Remove the pump strainer. To remove the pump strainer, you will need to unscrew it or unclip it from the pump.
  4. Inspect the pump strainer. Look for any debris that may be clogging the strainer. This could include leaves, twigs, insects, or other small objects.
  5. Clean the pump strainer. If the pump strainer is clogged, you will need to clean it. You can do this by rinsing it with water or by using a brush to remove the debris.
  6. Reinstall the pump strainer. Once the pump strainer is clean, you can reinstall it on the pump.
  7. Turn on the pump. Turn on the pump and check to make sure that the water is flowing freely through the pump strainer.

Here are some additional tips for checking the pump strainer:

  • You should check the pump strainer on a weekly basis, or more often if your pool is heavily used.
  • If the pump strainer is not cleaned regularly, it can become clogged and restrict the flow of water through the pump. This can damage the pump and reduce the efficiency of your pool filter.
  • If you have a cartridge filter, you may also need to clean the cartridge filter on a regular basis.

By following these steps, you can easily check the pump strainer in your pool and keep it clean and working properly.

Common Pool Problems 

1

If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.

Algae Or Green Pool Water 

1

Algae Problem:

Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.

90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.

DIY Solution:

Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Clogged Pool Filter

1

Clogged Filter Problem:

The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.

DIY Solution:

When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter cleaning services.

Broken Pool Filter

1

Broken Filter Problem:

The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.

DIY Solution:

There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter repair services.

Foaming On The Pool Surface

1

Foaming Problem:

Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.

DIY Solution:

Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool cleaning services.

Minerals In Pool Water

1

Mineral Problem:

Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.

DIY Solution:

Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool maintenance services.

Murky Water Or Green Pool Water 

1

Murky Or Green Pool Water Problem:

When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.

DIY Solution:

You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Stains On Pool Walls Or Pool Tile

1

Green Pool Wall Or Tile Stains Problem:

If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.

DIY Solution:

After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.

Brian’s Pool Care Offers Solutions To Your Pool Problems

1

Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.

Pool Trouble Issues 2023

Categories: Tags:

Pool Trouble Issues 2022

Are you having pool problems in  If so, Brian’s Pool Care can help! We put together a list of the most common pool problems and solutions to fix your problem yourself or hire a professional pool repair company to do it for you.


As summer has come, you are probably prepared to jump in the pool, right? Well, with that comes pool maintenance and many find it to be a daunting chore.

Since most people are not professional chemists, it is recommended by pool experts that you ask them about any issues you’re having before taking action. You can easily take in water samples to your local pool store on a monthly basis to have it tested.

There are many reasons why you should use a professional swimming pool cleaner. Here are some of the most important ones:

  • They have the experience and expertise to clean your pool properly. Professional pool cleaners have been trained to clean pools of all shapes and sizes. They know how to use the right equipment and chemicals to get the job done right.
  • They can save you time and hassle. Cleaning a pool can be a lot of work, especially if you have a large pool. Professional pool cleaners can come to your home and clean your pool on a regular basis, so you don’t have to worry about it.
  • They can help you keep your pool safe and healthy. Professional pool cleaners know how to balance the chemicals in your pool and remove any algae or bacteria. This helps to keep your pool safe for swimming.
  • They can help extend the life of your pool. Regular pool maintenance can help to prevent damage to your pool’s surface and equipment. This can save you money in the long run.

If you have a swimming pool, it is a good idea to use a professional pool cleaner. They can help you keep your pool clean, safe, and healthy.

Here are some of the services that professional pool cleaners typically offer:

  • Pool cleaning: This includes skimming the surface of the pool, vacuuming the bottom, and brushing the walls and tiles.
  • Pool water balancing: This involves adjusting the pH and chlorine levels in the water to keep it safe and healthy.
  • Pool algae removal: This is done by using chemicals or physical methods to remove algae from the pool.
  • Pool pump and filter maintenance: This includes cleaning and servicing the pump and filter to keep them working properly.
  • Pool opening and closing: This is done in the spring and fall to prepare the pool for swimming season.

The cost of professional pool cleaning services will vary depending on the size of your pool, the frequency of service, and the location of your home. You can get quotes from several different companies before making a decision.

I hope this helps!

Common Pool Problems In Ahwatukee

1

If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.

Algae Or Green Pool Water 

1

Algae Problem:

Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.

90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.

DIY Solution:

Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Clogged Pool Filter

1

Clogged Filter Problem:

The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.

DIY Solution:

When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter cleaning services.

Broken Pool Filter

1

Broken Filter Problem:

The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.

DIY Solution:

There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter repair services.

Foaming On The Pool Surface

1

Foaming Problem:

Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.

DIY Solution:

Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool cleaning services.

Minerals In Pool Water

1

Mineral Problem:

Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.

DIY Solution:

Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool maintenance services.

Murky Water Or Green Pool Water 

1

Murky Or Green Pool Water Problem:

When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.

DIY Solution:

You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Stains On Pool Walls Or Pool Tile

1

Green Pool Wall Or Tile Stains Problem:

If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.

DIY Solution:

After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.

Brian’s Pool Care Offers Solutions To Your Pool Problems

1

Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.

Pool Trouble Issues 2022

Categories: Tags:

Pool Trouble Issues 2022

Are you having pool problems in  If so, Brian’s Pool Care can help! We put together a list of the most common pool problems and solutions to fix your problem yourself or hire a professional pool repair company to do it for you.


As summer has come, you are probably prepared to jump in the pool, right? Well, with that comes pool maintenance and many find it to be a daunting chore.

Since most people are not professional chemists, it is recommended by pool experts that you ask them about any issues you’re having before taking action. You can easily take in water samples to your local pool store on a monthly basis to have it tested.

Common Pool Problems In Ahwatukee

1

If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.

Algae Or Green Pool Water 

1

Algae Problem:

Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.

90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.

DIY Solution:

Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Clogged Pool Filter

1

Clogged Filter Problem:

The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.

DIY Solution:

When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter cleaning services.

Broken Pool Filter

1

Broken Filter Problem:

The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.

DIY Solution:

There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter repair services.

Foaming On The Pool Surface

1

Foaming Problem:

Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.

DIY Solution:

Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool cleaning services.

Minerals In Pool Water

1

Mineral Problem:

Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.

DIY Solution:

Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool maintenance services.

Murky Water Or Green Pool Water 

1

Murky Or Green Pool Water Problem:

When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.

DIY Solution:

You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Stains On Pool Walls Or Pool Tile

1

Green Pool Wall Or Tile Stains Problem:

If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.

DIY Solution:

After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.

Brian’s Pool Care Offers Solutions To Your Pool Problems

1

Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.

Pool Trouble Issues 2021

Categories: Tags:

Pool Trouble Issues 2021

Are you having pool problems in  If so, Brian’s Pool Care can help! We put together a list of the most common pool problems and solutions to fix your problem yourself or hire a professional pool repair company to do it for you.


As summer has come, you are probably prepared to jump in the pool, right? Well, with that comes pool maintenance and many find it to be a daunting chore.

Since most people are not professional chemists, it is recommended by pool experts that you ask them about any issues you’re having before taking action. You can easily take in water samples to your local pool store on a monthly basis to have it tested.

Common Pool Problems In Ahwatukee

1

If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems and how to fix them.

Algae Or Green Pool Water 

1

Algae Problem:

Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.

90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.

DIY Solution:

Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Clogged Pool Filter

1

Clogged Filter Problem:

The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.

DIY Solution:

When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter cleaning services.

Broken Pool Filter

1

Broken Filter Problem:

The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.

DIY Solution:

There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter repair services.

Foaming On The Pool Surface

1

Foaming Problem:

Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.

DIY Solution:

Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool cleaning services.

Minerals In Pool Water

1

Mineral Problem:

Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.

DIY Solution:

Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool maintenance services.

Murky Water Or Green Pool Water 

1

Murky Or Green Pool Water Problem:

When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.

DIY Solution:

You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Stains On Pool Walls Or Pool Tile

1

Green Pool Wall Or Tile Stains Problem:

If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.

DIY Solution:

After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.

Brian’s Pool Care Offers Solutions To Your Pool Problems

1

Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.

Troubleshoot “Pool Filter Not Turning On” In Ahwatukee, Arizona

Categories: Tags:

Troubleshoot Pool Filter Not Turning On In Ahwatukee Arizona

If you are searching “Pool Filter Not Turning On” Near Ahwatukee, Arizona, Brian’s Pool Care can help!

Pool Filter Not Turning On In Ahwatukee, Arizona

If it seems like your pool’s filter may not be turning any (or) it does not have any sounds coming out of it. Here is what to do if there is no sound coming from your pool filter.

If there is no sound coming from your pool’s filter:

If nothing happens when the switch is flipped and there was no sound heard at all, take a look at the circuit breaker, this can be checked by flipping the breaker on and off, and back to on.

If you have it on a mechanical timer switch or a digital timer switch you will need to look at the Visual Motor Check and check the tiny motor gears to see if they are turning.

If your system has a GFCI outlet wired to it, you will need to check it and see if the red button has not popped up.

If there is power getting to the timer clock or the timer switch, you will need to look at the wires that run from the switch, going to the pump for signs of any damage, then, inspect the connections found on each end, you will be looking for loose wires or even an insect infestation.

However, if there is no power getting to the timer clock or the timer switch, it means that the switch or the breaker is either bad or its tiny little motor has died, or that one or more of the wires running from the breaker to the timer clock, or timer switch could be broken or loose. Here is what to do if there is sound coming from your pool filter.

If there are sounds coming from your pool’s filter:

If there is a humming sound coming from the pump motor when you try to start it, it could mean that the start capacitor is bad. If it is a Hayward pump, it will be the black cylinder which is mounted near the rear of its motor. This can be removed and replaced very easily.

However, before you order a new capacitor, make certain the shaft has not frozen up with rust. In order to spin the shaft, you will need to disconnect the power at the breaker, and remove capacitor (@9 o’clock) and (@ 12 o’clock) for the thermal overload in order to be able to slip a 7/16th inch wrench into the slotted shaft.

In order to break off any rust that has accumulated between the stator and the rotor, you will need to wiggle the wrench in the shaft by going through several revolutions. Next, you are going to re-secure the thermal and the capacitor overload switch.

PROFESSIONAL Pool Filter Repair In Ahwatukee:

If you can’t figure out how to fix your problem, let the professionals troubleshoot your pool filter not turning on. Brian’s pool care offer pool filter repair in Ahwatukee to help homeowners get their pool filters working again. Schedule Pool Filter Repair In Ahwatukee, Arizona by Calling Brian’s Pool Care at 480-907-7959 to receive professional pool filter repair services in Ahwatukee, Arizona.

Common Pool Problems In Ahwatukee

Categories: Tags:

Pool Problems In Ahwatukee

Are you having pool problems in Ahwatukee, Arizona? If so, Brian’s Pool Care can help! We put together a list of the most common pool problems in Ahwatukee and solutions to fix your problem yourself or hire a professional pool repair company to do it for you.


As summer has come, you are probably prepared to jump in the pool, right? Well, with that comes pool maintenance and many find it to be a daunting chore.

Since most people are not professional chemists, it is recommended by pool experts that you ask them about any issues you’re having before taking action. You can easily take in water samples to your local pool store on a monthly basis to have it tested.

Common Pool Problems In Ahwatukee

1

If you’re still interested in taking a hands-on approach to see if you have what it takes, below are the more common pool problems in Ahwatukee and how to fix them.

Algae Or Green Pool Water 

1

Algae Problem:

Algae in your pool water is the most common pool problem you will run into. It causes water to be green “green pool”, and in more extreme cases will have a green surface with swimmers exiting the pool like a swamp creature.

90% of algae growth occurs due to a low chlorine levels in the pool water or the pH balance if not correct.

DIY Solution:

Use a pool shock treatment with three times the amount of suggested shock treatment. Combine this with algaecide and it will get rid of the algae.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Clogged Pool Filter

1

Clogged Filter Problem:

The pool appears to be filled with debris, and when examining the filter, it is packed with debris too. There is no reason to worry. This simply shows the filter is working properly, and the filter has been clogged due to a dirty pool.

DIY Solution:

When clogged, simply remove the debris and perform usual filter maintenance. According to Brevik, filters and pumps should be chemically cleaned at least once a year to expand the functional life.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter cleaning services.

Broken Pool Filter

1

Broken Filter Problem:

The pool filter does not appear to be turning on at all. No noise is coming from the pool filter.

DIY Solution:

There aren’t any DIY solutions to replacing your broken filter unless you have pool equipment repair experience.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool filter repair services.

Foaming On The Pool Surface

1

Foaming Problem:

Pool appears to have a bunch of foam, with white suds appearing on the surface. The majority of foaming found in pools seem to occur due to a poor algaecide. When asking how to determine an algaecide is poor. They do not simply say they foam on the package, but they are often cheaper and sold in many major marketplaces.

DIY Solution:

Go grab you some anti-foam agent from the store to eliminate the foam. In the future, purchase your algaecide at a pool dealer.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool cleaning services.

Minerals In Pool Water

1

Mineral Problem:

Pool water becomes a brilliant teal or a chocolate milk brown and blonde hair may become green. The root of the issue is a build-up of minerals, and a lot of them. If iron minerals build-up, it causes brown water, and copper build-up causes water to appear teal and turns hair green.

DIY Solution:

Various chemicals are available at your local pool store to treat the issue. You will start by determining the type of mineral build-up, and grab the correct treatment.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool maintenance services.

Murky Water Or Green Pool Water 

1

Murky Or Green Pool Water Problem:

When you are unable to see the pool bottom and it becomes a mystery as to what lurks beneath… The common reason is your pH levels are out of balance, and rain will only increase the problem. Rain is very acidic in the area, and it impacts the pool’s pH levels.

DIY Solution:

You need to have the water tested to determine the pH level and adjust as needed. The pH level can be too high or too low.

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional green pool cleaning services.

Stains On Pool Walls Or Pool Tile

1

Green Pool Wall Or Tile Stains Problem:

If the wall of the pool has a brown stain or on the floor, and you have no idea where it came from, sounds like you may have a stain. If may be organic, or if you had a mineral build-up, this could be the cause. You can test this by putting a little pH decreaser on a sock, then rubbing it directly on the stain. If the stain is removed, you are done. If the stain remains, try the method again using a chlorine stick in the stock, instead of pH decreaser.

DIY Solution:

After testing, if the stain remains you need to consult the professionals by explaining the results of your test. However, you should take action quickly to increase the chance of removal. Hoffer stated that “It is similar to having your favorite cloths stained, the longer it goes without being treated, the harder the stain becomes to remove.”

PROFESSIONAL Solution:

Call Brian’s Pool Care to receive professional pool tile cleaning services or pool acid washing services.

Brian’s Pool Care Offers Solutions To Your Pool Problems

1

Brian’s Pool Care offers solutions to any pool problem you may be experiencing in Ahwatukee, AZ. Give us a call today at 480-907-7959 for more information or to schedule pool services.